Items where Division is "Fakultas Teknik > Program Studi Teknik Mesin" and Year is 2022

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: A | B | D | F | H | I | K | M | N | O | P | R | S | T | U | W | Y | Z
Number of items: 83.

A

Achmad, Raziv and Taufiqis S, Muchammad Rifan (2022) Kaji an Experiment of a Mixture of Ti 6% Influences with Variations in Kompaktion and Sinter Temperatures in the Alloy of Al-Ti Against the Density and Violence by the Metallurgy Method of Powder. Undergraduate thesis, Universitas 17 Agustus 1945 Surabaya.

Adam, Muhammad Haekal Seputro and Triansyah, Rian Ardy (2022) Analysis of The Effect of Variation of Smaw Welding Current on ASTM A106 Carbon Steel Pipe on Mechanicalproperties. Undergraduate thesis, Universitas 17 Agustus 1945 Surabaya.

Adriansyah, Achmad Nuh (2022) Effect of Variation of Heat Pressing Temperature and Reduction of Thickness on Aluminium and Reduction of Mass of Coal Ash Reinforced Aluminium Composite Materials After T6 Heat Treatment. Undergraduate thesis, Universitas 17 Agustus 1945 Surabaya.

Ahmad Hamzah, Hamzah (2022) Effect Of Fly Ash Fraction On Epoxy Hardener Resin Composites On Tensile Strength. Undergraduate thesis, Universitas 17 Agustus 1945 Surabay.

Albab, Adib Ulil (2022) Analysis of The Effect of Preheating on SMAW Welding Results in ASTM A53 with Variation of Temperature and Time with Hardness and Microstructure Testing. Undergraduate thesis, Universitas 17 Agustus 1945 Surabaya.

Andi, Ardianto (2022) Design And Construction Of Electric Scooter With A Capacity Of 24 Volt 35 Amperes. Undergraduate thesis, Universitas 17 Agustus 1945 Surabaya.

Andrianto, Fery Eko (2022) Analisis Pengaruh Campuran Pertamax Turbo Pada Bahan Bakar Bio Solar, Solar B50 Dan Dexlite Terhadap Prestasi Mesin Diesel Silinder Tunggal (Analysis of the Effect of Pertamax Turbo Mixture on Bio Solar, Solar B50, and Dexlite Fuel on the Performance of Single-Cylinder Diesel Engine). Undergraduate thesis, Universitas 17 Agustus 1945 Surabaya.

Andryanto, Lulot (2022) Analisa Pengaruh Tekanan dan % Komposisi terhadap Nilai Kekerasan Komposit Al-Abu Dasar Batu Bara dengan Metode Metalurgi Serbuk. Undergraduate thesis, Universitas 17 Agustus 1945 Surabaya.

Anggono, Satrio and Hermansyah, Andika (2022) Analysis of The Effect of The Number of Knife and The Speed of Round on The Corn Leader Machine. Undergraduate thesis, Universitas 17 Agustus 1945 Surabaya.

Annur, Aliansyah (2022) The Effect of Submitting Time and Speed on The Mechanical Properties of Coral Reinforced Polypropylene Composites. Undergraduate thesis, Universitas 17 Agustus 1945.

Ardiyanto, Rio (2022) Effect of Process Temperature Variation Hot Pressing and Reduction Thickness on The Evolution of Microstructure After The Initial and Final Quenching Process Aging Detention Time in Treatment Heat 16 Against Ash Basic Reinforced AMC Coal. Undergraduate thesis, Universitas 17 Agustus 1945.

Ardy, Firstyan Arizky Putra (2022) Analisis Pengaruh Penggunaan Variasi Busi dan Variasi Nilai Oktan Terhadap Performa Mesin Bensin 110 CC 1 Silinder. (Analysis of the Effect The Use of Variations Plug and Variations Octan Value on The Performance Petrol Engine 110 CC 1 Cylinder). Undergraduate thesis, Universitas 17 Agustus 1945 Surabaya.

Arif, Saiful and Saifullah, Ahmad (2022) Experimental Analysis of The Effect of Sinter Pressure and Temperature on Al-Ti Alloys on Hardness Using Powder Metallurgy Method. Undergraduate thesis, Univesitas 17 Agustus 1945 Surabaya.

Arifin, Samsul (2022) Analisa Panel Tenaga Surya Digunakan sebagai Sumber Tenaga Mesin Pemotong Rumpul Elektrik. (Design and Manufacture of Solar Electric Grass Mower). Undergraduate thesis, Universitas 17 Agustus 1945 Surabaya.

Atmaja, Arraply Iqbal Kusuma and Putra, Sendi Dwi (2022) Analisis Pengaruh Sudut Posisi Pisau Dan Kecepatan Putaran Terhadap Efisiensi Produktifitas Pada Mesin Perajang Bawang Tenaga Listrik (Analysis of the Effect of Knife Position Angle and Rotation Speed ​​on Productivity Efficiency in Electric Onion Chopper Machine). Undergraduate thesis, Universitas 17 Agustus 1945 Surabaya.

Aza, Marianus Mahendra Putra Umbu (2022) Effect Of Variations Of Nacl On Corrosion Rate And Microstructure Of Ss41 Steel Plate Using Sacrificial Anode Method. Undergraduate thesis, Universitas 17 Agustus 1945 Surabaya.

B

Basri, Hasan (2022) Analysis of Mechanical Properties by doing Al-Cu Mixing with Pressure Variation Method and Compact Sintering. Undergraduate thesis, Universitas 17 Agustus 1945 Surabaya.

Bio, Silvianus Gore and Raga, Oswaldus (2022) Pengaruh Kecepatan dan Lama Pengadukan Terhadap Porositas dan Dampaknya pada Sifat Mekanik Komposit Polipropilen. (The Effect of Speed and Duration of Stirring on Porosity and its Impact on The Mechanical Properties of Polypropylene Composites). Undergraduate thesis, Universitas 17 Agustus 1945 Surabaya.

Buaman, Arfin Alfian Tri and Oktavian, Riang Rachman (2022) Pengaruh Campuran Zat Adiktif dengan Bahan Bakar RON 90, RON 92, RON 95, dan RON 98 terhadap Kandungan Emisi Gas Buang dan Performa Kendaraan Roda Dua 110cc (Effect of Mixture of Addictive Substances with Ron 90, Ron 92, Ron 95, and Ron 98 Fuels on Exhaust Emission Content and Performance of Two-Wheel Vehicles 110 Cubic Centimeters). Undergraduate thesis, Universitas 17 Agustus 1945 Surabaya.

Burhan, Muhammad Nurul (2022) Analysis of The Effect of Variation of Pressure and Temperature of Sinter on Density and Hardness on 10% Al-Ti Alloy With Powder Metallurgy Method. Undergraduate thesis, Universitas 17 Agustus 1945 Surabaya.

D

Dedi, Cahyadi (2022) Analysis of Micro Structure and Hardness on Pre Heating Results of Smaw Welding JIS G 3131 SPHC Steel Plate with Variation of Temperature and Cooling Media. Undergraduate thesis, Universitas 17 Agustus 1945 Surabaya.

F

Faridho, Moh Arif (2022) Analysis of the Effect of Variations in Compaction Pressure and Sintering Temperature of Al-SiC Alloy on Density and Hardness Using Powder Metallurgy Method. Undergraduate thesis, Universitas 17 Agustus 1945 Surabaya.

Fatjri, Abdul Rohman and Ramadhan, Moch Yanuar (2022) Study of Variation of Heat Transfer Rate on R-22 Split AC Condensor Using Water Fluid. Undergraduate thesis, Universitas 17 Agustus 1945 Surabaya.

Fauji, Nanang Nur and Ramadhan, Fahad (2022) The Effect of Variation of MIG Welding Current on ASTM A106 Steel Pipe on Tensil, Hardness Testing and Micro Structure Testing Using ER70S-6 Electrode. Undergraduate thesis, Universitas 17 Agustus 1945 Surabaya.

Firmansyah, Addie Restu and Putra, Septian Chandra (2022) Analysis of Pack Carburizing Process on Raw Material Aisi 1020 on Surface Hardness and Microstructure with Variation of Temperature and Holding Time Using Oil Cooling Media. Undergraduate thesis, Universitas 17 Agustus 1945 Surabaya.

Firmansyah, Aditya and Reza, Bahrul Huda (2022) Planning of A Simple Briquette Press with A Drive Speed of 1400 RPM. Undergraduate thesis, Universitas 17 Agustus 1945 Surabaya.

Firmansyah, Danny (2022) Redesign The Thermoplastic Composite Material Mixer To Increase Work Effectiveness. Undergraduate thesis, Universitas 17 Agustus 1945 Surabaya.

Firmansyah, Fanny (2022) Analysis of The Effect of Variation of Pressure and Temperature of Sinter on Density and Hardness on 10% Al-Ti Alloy with Powder Metallurgy Method. Undergraduate thesis, Universitas 17 Agustus 1945 Surabaya.

H

Hakim, Firmansyah (2022) Analysis of Mechanical Properties of AL-CU Mixture with Treatment of Shirting Time and Variation of Compaction Pressure. Undergraduate thesis, Universitas 17 Agustus 1945 Surabaya.

Hariyanto, Aditya Dwi (2022) Analysis of The Effect of Variations of Natural Inhibitors and Solution Media on Corrosion Rate of ST 41 Carbon Steel (Case Study: JIIPE Manyar Gresik Port). Undergraduate thesis, Universitas 17 Agustus 1945 Surabaya.

Hermansyah, Andika and Anggono, Satrio (2022) Analysis of The Effect of The Number of Knife and The Speed of Round on The Corn Leader Machine. Undergraduate thesis, Universitas 17 Agustus 1945 Surabaya.

Hikam, Muhammad Nur and Saputro, Ragil (2022) Design and Construction of Hand Washing Machine with Automatic Bubbers Made of Microfiber and Electric Motor Driven. Undergraduate thesis, Universitas 17 Agustus 1945 Surabaya.

I

Iksan, Moch. Ridho Nur (2022) Analysis of The Effect of PWHT on St 41 Steel on Heat Working Process with Variation of Heating Temperature and Holding Time on Mechanical Properties and Microstructure. Undergraduate thesis, Universitas 17 Agustus 1945 Surabaya.

K

Kristianto, Kristianto (2022) Dampak Berat Fosfor dan Boron Terhadap Aliran Arus pada Material. (Effects of Heavy Phosphorus and Boron on Current Flow in Materials). Undergraduate thesis, Universitas 17 Agustus 1945 Surabaya.

Kurniawan, Irfan and Andrianto, Ferry Eko (2022) Analysis of The Effect of Pertamax Turbo Mixture on Bio Solar, Solar B50, and Dexlite Fuel on The Performance of Single-Cylinder Diesel Engine. Undergraduate thesis, Universitas 17 Agustus 1945 Surabaya.

M

Mahfud, Muhammad Amirul (2022) Experimental Analysis of the Influence of Sintering Pressure and Temperature on Hardness and Densities of 12% Al-Ti Using Powder Metalurgy Method. Undergraduate thesis, Universitas 17 Agustus 1945 Surabaya.

Manggo, Matias Ransey and Nurdin, Yeremias Ariyanto (2022) Korelasi Berat Jenis Penguat pada Kekuatan Komposit Polirpolien. (Correlation of The Specific Gravity of The Reinforcer on The Strength of Polypropylene Composites). Undergraduate thesis, Universitas 17 Agustus 1945 Surabaya.

Maulana, Naufal Iqbal and Putro, Mochamad Firdaus Yulianto (2022) Analysis the Effect of the Number Blades Turbine and Turbine Head on Kaplan Turbine Performance for Microhydro Power Plant. Undergraduate thesis, Universitas 17 Agustus 1945 Surabaya.

Mikhail Ma'ruf, Mohammad (2022) Design And Construction Of Electric Scooter With A Capacity Of 24 Volt 35 Amperes. Undergraduate thesis, Universitas 17 Agustus 1945.

Muliarto, Achmad and Satriya, Ahmad (2022) Analysis of Mixture of Bottle Ash and Wood Powder for Bricketing with Pressing Process. Undergraduate thesis, Universitas 17 Agustus 1945 Surabaya.

N

Namang, Hedwiq Bruno (2022) Analisis Laju Korosi dan Struktur Mikro Material Al-6061 Sebagai Anoda Korban dengan Variasi NaCl. (Analysis of Corrosion Rate and Micro Structure of Al-6061 Material as A Sacrifice Anode with Variation of NaCI). Undergraduate thesis, Universitas 17 Agustus 1945 Surabaya.

O

Oktafian, Riang Rachman and Buaman, Arfin Alfian Tri (2022) Pengaruh Campuran Zat Adiktif dengan Bahan Bakar RON 90, RON 92, RON 95, dan RON 98 terhadap Kandungan Emisi Gas Buang dan Performa Kendaraan Roda Dua 110cc (Effect of Mixture of Addictive Substances with Ron 90, Ron 92, Ron 95, and Ron 98 Fuels on Exhaust Emission Content and Performance of Two-Wheel Vehicles 110 Cubic Centimeters). Masters thesis, Universitas 17 Agustus 1945 Surabaya.

Oswaldus, Raga (2022) Pengaruh Kecepatan dan Lama Pengadukan Terhadap Porositas dan Dampaknya Pada Sifat Mekanik Komposit Polipropilen. (Effect of Stirring Speed ​​and Duration on Porosity and Their Impact on The Mechanical Properties of Polypropylene Composites). Undergraduate thesis, Universitas 17 Agustus 1945 Surabaya.

P

Pambudi, Aditya angger and Putra, Handhika dwi (2022) The Effect of Fly Ash Fraction on Epoxy Resin Hardener Composite with Variation in Rotation on Bending Strength. Undergraduate thesis, Universitas 17 Agustus 1945 Surabaya.

Panjaitan, Cosmitra Alan and Zulfikar, Zulfikar (2022) Effect of Variation of Cooling Media and Casting Temperature on Al-Si on Hardness and Microstructure Test. Undergraduate thesis, Universitas 17 Agustus 1945 Surabaya.

Perwirahutama, Bima Aulia Esha (2022) Analysis of Micro Structure and Hardness on SMAW Welding Of Low Carbon Steel with Variations of Welding Current and Cooling Media. Undergraduate thesis, Universitas 17 Agustus 1945 Surabaya.

Pratama, Gherry Putra and Ardiyanto, Muhammad Ferdi (2022) Rancang Bangun Mesin Perontok Padi dengan Kapasitas 500 Kg/Jam. (Design of a Rice Throwing Machine with A Capacity of 500 Kg/Hour). Undergraduate thesis, Universitas 17 Agustus 1945 Surabaya.

Pratama, Mochammad Dafa Wilga and Ridzal, Miftakhul (2022) Analysis of The Effect of Pressure Variations and Sintering on the Hardness Value of Al- Local Iron Sand 5% Composite Using Powder Metallurgy Method. Undergraduate thesis, Universitas 17 Agustus 1945 Surabaya.

Purnomo, Dwi and Ulloh, Wildana Auliya (2022) Perancangan Alat Jominy Test dan Pengujian Kemampukerasan Baja St 37. Undergraduate thesis, Universitas 17 Agustus 1945 Surabaya.

Putra, Handhika dwi and Pambudi, Aditya angger (2022) The Effect of Fly Ash Fraction on Epoxy Resin Hardener Composite with Variation in Rotation on Bending Strength. Undergraduate thesis, Universitas 17 Agustus 1945 Surabaya.

Putra, Igap Mandala (2022) Analysis of the Effect of Heater Placement and Blower Speed ​​on Uniformity of Temperature of the Chicken Poop. Undergraduate thesis, Universitas 17 Agustus 1945 Surabaya.

Putra, Sendi Dwi and Kusuma Atmaja, Arraply Iqbal (2022) Analisis Pengaruh Sudut Posisi Pisau dan Kecepatan Putaran terhadap Efisiensi Produktivitas Mesin Perajang Bawang Tenaga Listrik (Analysis of the Effect of Knife Position Angle and Rotation Speed ​​on Productivity Efficiency of Electric Onion Chopper Machine). Undergraduate thesis, Universitas 17 Agustus 1945 Surabaya.

Putra, Septian Chandra and Firmansyah, Addie Restu (2022) Analysis of Pack Carburizing Process on Raw Material Aisi 1020 on Surface Hardness and Microstructure with Variation of Temperature and Holding Time Using Oil Cooling Media. Undergraduate thesis, Universitas 17 Agustus 1945 Surabaya.

Putranta, R. Dany Kusuma Dwi (2022) Analysis of The Effect of Heating and Cooling Media Temperature Variations on The Carburizing Process to Testing Hardness and Micro Structure on Low Carbon Steel. Undergraduate thesis, Universitas 17 Agustus 1945 Surabaya.

Putro, Mochamad Firdaus Yulianto and Maulana, Naufal Iqbal (2022) Analysis the Effect of the Number Blades Turbine and Turbine Head on Kaplan Turbine Performance for Microhydro Power Plant. Undergraduate thesis, Universitas 17 Agustus 1945 Surabaya.

R

Rahmanda, Bagus Dwi and Agamsyah, Banarizqyan Aghnia (2022) Analysis of The Effect of The Speed of Turn and The Number of Knife on The Carrot Thin Slier Machine on Production Capacity. Undergraduate thesis, Universitas 17 Agustus 1945 Surabaya.

Ramadhan, Moch Yanuar and Fatjri, Abdul Rohman (2022) Study of Variation of Heat Transfer Rate on R-22 Split AC Condensor Using Water Fluid. Undergraduate thesis, Universitas 17 Agustus 1945 Surabaya.

Ridzal, Miftakhul and Pratama, Mochammad Dafa Wilga (2022) Analysis Of The Effect Of Pressure Variations And Sintering On The Hardness Value Of Ai- Local Iron Sand 5% Composite Using Powder Metallurgy Method. Undergraduate thesis, Universitas 17 Agustus 1945 Surabaya.

Robi, Salamun (2022) Design and Construction of Fertilizer Mixer Organic Using AC Dynamo Motor Drive with Organic Fertilizer Capacity 50 Kg/Hour. Undergraduate thesis, Universitas 17 Agustus 1945 Surabaya.

Robianto, Robianto (2022) Analysis of The Effect of Heater Placement and Blower Speed on Uniformity of Temperature of The Chicken Coop. Undergraduate thesis, Universitas 17 Agustus 1945 Surabaya.

Rochman, Achmad Taufiqur (2022) Analysis of The Effect PWHT with The Variations of Temperature and Holding Time on Smaw Welding Results of JIS G 3131 SPHC Steel Plate on Micro Structure and Hardness. Undergraduate thesis, Universitas 17 Agustus 1945 Surabaya.

S

Saifullah, Ahmad and Arif, Saiful (2022) Experimental Analysis of The Effect of Sinter Pressure and Temperature on Al-Ti Alloys on Hardness Using Powder Metallurgy Method. Undergraduate thesis, Univesitas 17 Agustus 1945 Surabaya.

Sampelawang, Arya Dharma (2022) Analysis of the Effect of the Height of the 3 Blade Savonius Water Turbine and the Addition of Flows on the Concvent Side on Turbine Perfomance. Undergraduate thesis, Universitas 17 Agustus 1945 Surabaya.

Sandi, Aji Laksamana (2022) Analysis Of The Effect Of Refrigerant 134A On 1500 Cc Car With Variations Of Compressor Rotating Speed. Undergraduate thesis, Universita 17 Agustus 1945 Surabaya.

Saputro, Ragil and Hikam, Muhammad Nur (2022) Design and Construction of Hand Washing Machine with Automatic Bubbers Made of Microfiber and Electric Motor Driven. Undergraduate thesis, Universitas 17 Agustus 1945 Surabaya.

Sarwanto, Sarwanto and Andrian, Galih Rizka (2022) The Effect Of Current And Electrode Diameter Type Rb-26 On Smaw Welding Analysis For St 42 Steel On Mechanical Properties. Undergraduate thesis, Universitas 17 Agustus 1945 Surabaya.

Satriyawan, Ahmad and Muliarto, Achmad (2022) Analysis of Mixture of Bottle Ash and Wood Powder for Bricketing with Pressing Process. Undergraduate thesis, Universitas 17 Agustus 1945 Surabaya.

Setyawan, Muhammad Ari and Sudiharjo, Achmad (2022) Rancang Bangun Tempat Sampah Otomatis Berbasis Arduino Uno dengan Pengaruh Sensor Ultrasonik. (Design of Automatic Trash Based on Arduino Uno with Ultrasonic Sensor Effect). Undergraduate thesis, Universitas 17 Agustus 1945 Surabaya.

Syafi'udin, Syafi'udin and Ulumuddin, Muhammad Ihya' (2022) Pengaruh Sudut Fin dan Berat Sudu terhadap Kinerja Turbin Savonius Type L (The Effect of Fin Angle and Blade Weight on Savonius Type L . Turbine Performance). Undergraduate thesis, Universitas 17 Agustus 1945 Surabaya.

Syahputra, Elang Damai Alif (2022) Analisa Kekuatan Baja Profil L Menggunakan Metode Hardening dengan Pengujian Hardness dan Micro Menggunakan Variasi Waktu Tahan dan Media Pendingin. (Strength Analysis of Profile L Steel Using Hardening Method with Hardness and Micro Testing Using Variation of Holding Time and Cooling Media). Undergraduate thesis, Universitas 17 Agustus 1945 Surabaya.

Syamsudin, Asof (2022) Analysis of The Effect of Radiator Fluid and Engine Racing on Radiator Capacity and Heat Absorption Effectiveness on Honda Mobilio Type DD4 MT 1.5 E. Undergraduate thesis, Universitas 17 Agustus 1945 Surabaya.

T

Taufiqis S, Muchammad Rifan and Achmad, Raziv (2022) Kaji an Experiment of a Mixture of Ti 6% Influences with Variations in Kompaktion and Sinter Temperatures in the Alloy of Al-Ti Against the Density and Violence by the Metallurgy Method of Powder. Masters thesis, Universitas 17 Agustus 1945 Surabaya.

Triansyah, Rian Ardy and Adam, Muhamad Haekal Seputro (2022) Analysis of The Effect of Variation of SMAW Welding Current on ASTM A106 Carbon Steel Pipe on Mechanical Properties. Undergraduate thesis, Universitas 17 Agustus 1945 Surabaya.

Triyahya, Luki (2022) Analisa Antarmuka antara Bahan Penguat dan Matriks pada Komposit Polipropilen Berpenguat Serbuk Tempurung Kelapa (Filler and Matrix Interface Analysis of Polypropylene Coconut Shell Powder Composite). Undergraduate thesis, Universitas 17 Agustus 1945 Surabaya.

U

Ulloh, Wildana Auliya and Purnomo, Dwi (2022) Perancangan Alat Jominy Test dan Pengujian Kemampukerasan Baja St 37. Undergraduate thesis, Universitas 17 Agustus 1945 Surabaya.

Ulumuddin, Muhammad Ihya' and udin, syafi' (2022) Pengaruh Sudut Fin dan Berat Sudu terhadap Kinerja Turbin Savonius Type L (The Effect of Fin Angle and Blade Weight on Savonius Type L . Turbine Performance). Undergraduate thesis, Universitas 17 Agustus 1945 Surabaya.

Utomo, Patrisius Wahyu Budi (2022) Rancang Bangun Alat Mesin Pengayak Beras Menggunakan Metode Vibrating dengan Variasi Putaran Motor dan Sudut Kemiringan Ayakan. (Design and Development of Rice Screening Machine Using Vibrating Screen Method with Motor Rotation Variations and Tilt). Undergraduate thesis, Universitas 17 Agustus 1945 Surabaya.

W

Wiryanto, Ricky Agung (2022) Effect of Variations of Temperature, Pressure and Cooling Time on Production Cycle Time and Product Weight on Plastic Injection Molding Process. Undergraduate thesis, Universitas 17 Agustus 1945 Surabaya.

Y

Yahya, Muhammad Khadiq and Priambodoh, Panggalih (2022) Design And Construction Of Tempe Shipping Machine Using Knife Rotari With Variations Of Motorcycle Rights And Number Of Eyes Knife. Undergraduate thesis, Universitas 17 Agustus 1945 Surabaya.

Yusuf, Yusuf (2022) Analisis Pengaruh Penggunaan Variasi Busi dan Variasi Nilai Oktan Terhadap Performa Mesin Bensin 110 CC 1 Silinder. (Analysis of The Effect The Use of Variations Plug and Variations Octan Value on The Performance Petrol Engine 110 CC 1 Cylinder). Undergraduate thesis, Universitas 17 Agustus 1945 Surabaya.

Z

Zakaria, Mohammad Septiawan (2022) The Effect of Electric Current and Gas Debit on Aluminium Board Desk Welding Results with TIG Welding Results with TIG Welding Techniques. Undergraduate thesis, Universitas 17 Agustus 1945 Surabaya.

Zeremia, Titus (2022) Design And Development Of Rice Screening Machine Using Vibrating Screen Method With Motor Rotation Variations And Tilt. Undergraduate thesis, Universitas 17 Agustus 1945 Surabaya.

Zulfikar, Zulfikar and Panjaitan, Cosmitra Alan (2022) Effect of Variation of Cooling Media and Casting Temperature on Al-Si on Hardness and Microstructure Test. Undergraduate thesis, Universitas 17 Agustus 1945 Surabaya.

This list was generated on Tue May 21 14:58:57 2024 WIB.