Items where Division is "Fakultas Teknik > Program Studi Teknik Mesin" and Year is 2019

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: Thesis | Artefact
Number of items: 39.

Thesis

Andrianto, Dedy Setia and Muhyin, Muhyin (2019) Pengaruh Radius Insert (r�) dan Kedalaman Sayat (a) Terhadap Besar Perubahan Kekasaran Permukaan Material S45C Pada Proses Pemesinan Bubut CNC. Undergraduate thesis, UNIVERSITAS 17 AGUSTUS 1945.

Anugrah, Robert Adi (2019) Redesain Mesin Pemeras Tebu Dengan Variasi 6 Roll dan 8 Roll Penggiling. Undergraduate thesis, UNIVERSITAS 17 AGUSTUS 1945.

Ardyanto, Bayu (2019) Experimental Study Of The Effect Working Temperature Variation And Reduction Area In Pressing On The Hardness And Microsstucture (Grain Size) Of Alluminium Composite – Bottom Ash. Undergraduate thesis, Untag 1945 Surabaya.

Azzirqon, Rozi Nur (2019) Analysis of the Effect of Temperature Variations Dissolution And Dissolution Hold Time At Aluminum Composite T6 Treatment Process Coal Base Ash As Base Material Three Leaf Propeller Against Mechanical Properties. Undergraduate thesis, Untag 1945 Surabaya.

Darmawan, Toni (2019) Long Influence Analysis Of Helical And Kinds Of Freon Pipes On Working Refrigeration Machines For Untag Laboratory Surabaya. Undergraduate thesis, Untag 1945 Surabaya.

Efendi, Mohammad Erfan (2019) Aluminium Alloy 6061 Analysis Reinforced Iron Powder With Cooling Media Variations And Aging Temperature To The Hardness And Strength Of Tensile Material After T6 Heating Process. Undergraduate thesis, Untag 1945 Surabaya.

Efendi, Mohammad Erfan (2019) Analisa Paduan Aluminium 6061 Berpenguat Serbuk Besi Dengan Variasi Media Pendingin Dan Temperatur Aging Terhadap Kekerasan Dan Kekuatan Tarik Material Setelah Proses Pemanasan T6. Undergraduate thesis, Untag 1945 Surabaya.

Faruq, Umar (2019) Effects Of Temperature Variations And Withdrawal Rates On Microstructure And Flow Stress Of Aluminum 2075 Composite Plates With Reinforcement Off Bottom Ash. Undergraduate thesis, Untag 1945 Surabaya.

Fatoni, Risqi and Fahrudin, Amirul Angga (2019) Experimental Study Of The Effect Of Aging Temperatures And Aging Time Variations In The Process Of Aluminum 2024 Heat Treatment On Mechanical Properties And Micro Structures. Undergraduate thesis, Untag 1945 Surabaya.

Fauzi, Ahmad and Saputra, Ricky Rudi (2019) Study Experimental Burner Invers Diffusion Flame Coa Using Chamfer 60° Air Jet Tip With Variations In Fuel Pressure And Air Velocity. Undergraduate thesis, Untag 1945 Surabaya.

Hadikarnata, Wanu Nugroho (2019) Experimental Study Of The Effect Of Temperature And Variations Speed Withdrawal On Composite Superplasticity 2xxx - Bottom Ash. Undergraduate thesis, Untag 1945 Surabaya.

Harman, Emanuel (2019) The Effect Of Variation In Cutting Speed Of The Feed Lathe Depth Using Hss Chisels On The Roughness Of St 42 Iron And Aluminum. Undergraduate thesis, Untag 1945 Surabaya.

Masrufi, Hadi and Aditya, Bagus (2019) Experimental Study Of The Effect Of Resistant Time On The Establishment Of Phase Calcium From Fe2 Mixture Based On Iron Sand And Curtain Materials O3 and Caco3. Undergraduate thesis, Untag 1945 Surabaya.

Munir, Misbahul (2019) EThe Effect Of T6 Heat Treatment On Microstructure And Thermal Stress Of Aluminium Composites With Reinforcement Of Coal Bottom Ash. Undergraduate thesis, Untag 1945 Surabaya.

Mursyid, Muhamad Abdillah (2019) Experimental Study Of The Effect Of Temperature Variations And Percentage Of Reduction Of Sector In Pressing Process On Corrosion Rate And Micro Structure Of Aluminum Composites - Coal Basic Ash. Undergraduate thesis, Untag 1945 Surabaya.

Muzakka, . and Prastiyo, Nurul Huda Adi (2019) The Effect Of Heat Treatment Tempering With Temperature Variation And Holding Time On Mechanical Properties Of Ems Steel 45. Undergraduate thesis, Untag 1945 Surabaya.

Ngara, Fredirikus Bali (2019) Analisa Pengaruh Temperatur Karbonisasi Dan Penambahan Karbon Terhadap Sifat Mekanik Baja St 60 Pada Poros Roda Motor Supra X. Undergraduate thesis, Untag 1945 Surabaya.

Nurochman, Moh. Taufik and ARSWENDA, HELMI YAHYA and MUKTI, GIGIH PERWIRA (2019) Pengaruh Tekanan Bahan Bakar Dan Kecepatan Udara Terhadap Struktur Nyala Api Pada Inverse Diffusion Flame Dengan Menggunakan Bahan Bakar CNG. Undergraduate thesis, UNIVERSITAS 17 AGUSTUS 1945.

Nurqolikin, Dian Fendi (2019) Analisa Pengaruh Putaran Dan Sudut Pisau Terhadap Kapasitas Produksi Pada Mesin Pencacah Plastik. Undergraduate thesis, Untag 1945 Surabaya.

Permana, Sukma Adi and Baidhowi, Achmad and Seputra, Yasika (2019) Kaji Eksperimental Radiasi Api Dari Pengaruh Variasi Tekanan Biogas dan Laju Aliran Konstan Pada Proses Pemurnian dan Tanpa Pemurnian. Undergraduate thesis, UNIVERSITAS 17 AGUSTUS 1945.

Prayitno, Hadi and Julianto, Agus and Vicky Habibi, Moch. Vicky and Muhyin, Muhyin (2019) Analisa Pengaruh Variasi Sudut Bidang Miring Pada Corong Input & Kecepatan Putar Pisau Terhadap Kapasitas dan Kualitas Hasil Olahan Pada Mesin Pemotong Ikan. Undergraduate thesis, UNIVERSITAS 17 AGUSTUS 1945.

Prayogo, Bangkit Suryo (2019) Analisa Pengaruh Variasi Waktu Tahan Pelarutan dan Temperature Aging Pada Proses Perlakuan T6 Komposit Aluminium Abu Dasar Batubara Sebagai Bahan Dasar Propeller Tiga Daun Terhadap Kekerasan dan Kekuatan Tarik. Undergraduate thesis, UNIVERSITAS 17 AGUSTUS 1945.

Putra, Yosua Utomo and Setyawan, Willy (2019) Perancangan Mesin Prototipe Penghancur Batu dan Cangkang Kerang. Undergraduate thesis, UNIVERSITAS 17 AGUSTUS 1945 SURABAYA.

Radamuri, Triason Erno (2019) Analysis Of The Effect Of Variation Of Solution Temperature And Aging Temperature In The T6 Treatment Process Of Coal Aluminum Composites As Three Leaves Propeller Material Against Tension Strength And Violence. Undergraduate thesis, Untag 1945 Surabaya.

Rahman, Ardi Nur (2019) Experiment Study On The Effect Of Temperature Variations And The Reduction Of Cross Section On The Making Of Composite Plate Al-Coal Bottom Ash On Wear Rate And Microstucture. Undergraduate thesis, Untag 1945 Surabaya.

Ramadani, Febriansyah and Rozi, Moch.Fathur (2019) Rancang Bangun Mesin Pemeras Eceng Gondok. Undergraduate thesis, UNIVERSITAS 17 AGUSTUS 1945 SURABAYA.

Rasyid, M.Haritz (2019) Analisa Pengaruh Variasi Temperature Pelarutan dan Jenis Media Pendingin Pada Proses Perlakuan Panas T6 Komposit Aluminium Abu Dasar Batubara Sebagai Bahan Dasar Propeler Tiga Daun Terhadap Kekuatan Tarik dan Kekerasan. Undergraduate thesis, UNIVERSITAS 17 AGUSTUS 1945.

Rizky Hidayat, Eka and Prasetyo, Erika (2019) Effect Of The Effect Of Composit Al 6061 On Iron Powder With Variation Of Solution Heat Treatment Temperature Through The T6 Heat Treatment Process On Violence And Impact Test. Undergraduate thesis, Untag 1945 Surabaya.

Rochman, Muhammad Habibur and Triono, Firdaus Kurniawan (2019) Analysis Of The Influence Of Performance Of Savonius Type V Wind Turbin On Changes Fin Gap Blade Gap And Fin Tilt Angle. Undergraduate thesis, Untag 1945 Surabaya.

Rochmat, Taufiq and Muhyin, Muhyin (2019) Pengaruh Kecepatan Putar (n) dan Feeding (f) Insert Cutter Terhadap Tingkat Kekasaran Permukaan Baja S45C (JIS G4051) Hasil Pemesinan CNC Bubut. Undergraduate thesis, UNIVERSITAS 17 AGUSTUS 1945.

Safi’i, Imam (2019) Analisa Pengaruh Variasi Temperatur Dan Waktu Aging Pada Hasil Pengecoran Al-Cu Terhadap Kekerasan. Undergraduate thesis, Untag 1945 Surabaya.

Setiawan, Rendy (2019) Redesain Mesin Pemeras Tebu Dengan Variasi 6 Roll dan 8 Roll Penggiling. Undergraduate thesis, UNIVERSITAS 17 AGUSTUS 1945.

Sohib, Muchamad (2019) Effect Of Fuel Pressure And Air Velocity On The Fire Structure On The Idf Coa Burner Using A Chamfer Air Jet Tip Of 40°. Undergraduate thesis, Untag 1945 Surabaya.

Supriyanto, Faustra Devanda (2019) Experimental Study Of The Effect Temperature And Strain Rate Variations On Flow Stress The Composite Plate Of Al 2075 Reinforcement Bottom Ash. Undergraduate thesis, Untag 1945 Surabaya.

Tani, Stephanus Gaudensius (2019) Analysis Study of Fault Models on Aluminum Composites Coal Base Ash As 3 Leaf Propeller Base That Gets T6 Heat Treatment And Artifical Aging. Undergraduate thesis, Untag 1945 Surabaya.

Waluyo, Handoko Tri (2019) Analisa pengecoran aluminium paduan magnesium dengan variasi aging heat treatment dan holding time terhadap kekerasan dan struktur mikro. Undergraduate thesis, UNIVERSITAS 17 AGUSTUS 1945 SURABAYA.

Yahya, Kurniyawan (2019) Experimental Study Of Inverse Diffusion Flame Burner Cap Type Used 12 Fuel Holes With Variations Fuel Pressure And Air Flow Capacity. Undergraduate thesis, Untag 1945 Surabaya.

Zubairianto, Muhammad (2019) Experimental Study Of The Effect Of Variation Of Aging Temperature And Aging Time On Fatigue Al 2075 Composite Plate With Coal Bottom Ash. Undergraduate thesis, Untag 1945 Surabaya.

Artefact

Bab, Choirul Ulil Al (2019) Analisa Pengaruh Variasi Kecepatan Pulley Pada Cylinder Grater Terhadap Jenis Kapasitas Kelapa Dan Kualitas Empelur Pada Mesin Pemarut Kelapa. [Artefact]

This list was generated on Sun Jun 16 19:34:07 2024 WIB.